144-40L RESIN, PROBOND 5040, LITER

(click to enlarge)

When used properly, a high quality low viscosity (40-50cps) resin will perform well in all weather conditions, but some technicians switch to a little higher viscosity in the summer when temperatures exceed 100 degrees. If you fall into this category, Delta Kits offers a this 40-50cps resin that you are sure to fall in love with. Using a higher viscosity resin in extreme heat will help you avoid the daisy or flower effect that is caused from too much pressure on a very hot windshield, but is not a substitute for using proper cooling techniques and pressure control.

Easily injected into all kinds of breaks. Cures fast and hard for permanent, superior repairs. For best results it should be covered with curing tape and cured with ultraviolet lights as quickly as possible after the break is filled and all air has been removed from the break. There is no finer resin on the market, yet your cost per repair is still under 50 cents!

If purchased by the liter, resin costs are less than 10 cents per repair!

Packaged in a 15ml amber glass bottles with bulb type dropper for easy dispensing into any type of repair assembly. Or, for volume customers, we offer our ProBond resin in Liter containers.