B300 Vacuum Cup Filter for Windshield Repair Bridges

$2.75

In Stock

Replacement filter to bottom of 13110 vacuum cup of the B300 Vacuum Cup Bridge Assembly.

Replaces Part Number: SCF-101

- +
SKU: 13110 Category:

30 DAY MONEY BACK

35+ YEARS IN BUSINESS

30 DAY MONEY BACK

MADE IN THE USA

35+ YEARS IN BUSINESS

Details

Details

Description

B300 Vacuum Cup Filter for Delta Kits’ B300 windscreen rock chip repair bridge. Replacement filter to bottom of 13110 vacuum cup of the B300 Vacuum Cup Bridge Assembly.

Replaces Part Number: SCF-101


From the Archives

How to Clean and Maintain the B300 Windshield Repair Bridge Assembly

Learn how to clean and maintain the B300 Bridge Assembly. Proper storage and maintenance of the B300 Bridge will prolong the life of the cup and pump, and keep it ready for your next windshield repair.

Cleaning:

  • Remove the air filter from the face of the cup.
  • Scrub the cup face using soapy water. Do not use glass cleaner or alcohol. CAUTION: To prevent liquid from contaminating the pump, remove the cup before cleaning it.
  • Rinse all residue from the cup face.
  • Allow the cup to dry and reinstall the air filter.

Maintenance:

Inspecting and Maintaining the Cup

  • First, clean the cup surface according to the directions (See Cleaning).
  • Use a 600 grit or finer sandpaper to remove any glaze that’s built up near the rubber cup. Lay the sandpaper on a flat surface and set the cup face down on top of it. Rotate the cup left and right to gently sand the edge of the cup, keeping the cup and sandpaper flat at all times.
  • Inspect the cup for damage. Inspect the rubber carefully and replace it if there are any cuts, tears or other damage to the cup.
  • Check the air filter. Make sure the cup’s air filter is in place. If not, discontinue use until the filter is replaced.

Inspecting the Vacuum Pump Filter and Seal.

  • Remove the plastic plunger on the pump by pulling it straight out of the plastic cylinder and check to see if there are any cuts, tears, or other damage to the seal at the end of the plunger.
  • Every 200 repairs inspect the seal in the pump to see if it needs lubricant. If so, apply a thin layer of a non-petroleum based lubricant.
  • Check to see that the plastic pump is clean and free from obstruction. If there are any cracks in the plastic or damage to the plunger seal, the pump must be…. Continue Reading
Ratings and Reviews

Ratings and Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping

Shipping

Delta Kits Shipping:

Training

Training

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

Ask an Expert

Ask an Expert

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

Description

B300 Vacuum Cup Filter for Delta Kits’ B300 windscreen rock chip repair bridge. Replacement filter to bottom of 13110 vacuum cup of the B300 Vacuum Cup Bridge Assembly.

Replaces Part Number: SCF-101


From the Archives

How to Clean and Maintain the B300 Windshield Repair Bridge Assembly

Learn how to clean and maintain the B300 Bridge Assembly. Proper storage and maintenance of the B300 Bridge will prolong the life of the cup and pump, and keep it ready for your next windshield repair.

Cleaning:

  • Remove the air filter from the face of the cup.
  • Scrub the cup face using soapy water. Do not use glass cleaner or alcohol. CAUTION: To prevent liquid from contaminating the pump, remove the cup before cleaning it.
  • Rinse all residue from the cup face.
  • Allow the cup to dry and reinstall the air filter.

Maintenance:

Inspecting and Maintaining the Cup

  • First, clean the cup surface according to the directions (See Cleaning).
  • Use a 600 grit or finer sandpaper to remove any glaze that’s built up near the rubber cup. Lay the sandpaper on a flat surface and set the cup face down on top of it. Rotate the cup left and right to gently sand the edge of the cup, keeping the cup and sandpaper flat at all times.
  • Inspect the cup for damage. Inspect the rubber carefully and replace it if there are any cuts, tears or other damage to the cup.
  • Check the air filter. Make sure the cup’s air filter is in place. If not, discontinue use until the filter is replaced.

Inspecting the Vacuum Pump Filter and Seal.

  • Remove the plastic plunger on the pump by pulling it straight out of the plastic cylinder and check to see if there are any cuts, tears, or other damage to the seal at the end of the plunger.
  • Every 200 repairs inspect the seal in the pump to see if it needs lubricant. If so, apply a thin layer of a non-petroleum based lubricant.
  • Check to see that the plastic pump is clean and free from obstruction. If there are any cracks in the plastic or damage to the plunger seal, the pump must be…. Continue Reading

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delta Kits Shipping:

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

YOU MIGHT ALSO LIKE

B300 Vacuum Cup Filter for Windshield Repair Bridges

$2.75

Your Cart
0