Screw Type Injector Plunger I-100SM Stainless Steel

$100.00

In Stock

Part number 12030 is the Replacement Plunger for the Delta Kits I-100S Screw-Type, polished stainless-steel windshield repair injector (non-spring-loaded). Polished Stainless Steel construction makes it fast, smooth, durable, and easy to clean.

- +
SKU: 12030 Categories: ,

30 DAY MONEY BACK

35+ YEARS IN BUSINESS

30 DAY MONEY BACK

MADE IN THE USA

35+ YEARS IN BUSINESS

Details

Details

Description

The Screw Type Injector Plunger I-100SM, 12030, is a robust and well-built windshield repair tool that is virtually “bulletproof” and has 4 impressive features:

  • Manufacturing excellence, high-sheen stainless-steel polish surfaces I-100S injector plunger. The stainless steel provides for smoother operation.
  • Superior tooling providing excellent fit and function.
  • Knurling has been retained in key grip areas, but is less pronounced for improved comfort.
  • Minimal threads on the outer piston make for fast operation and less resin waste.

Use the Screw Type Injector Plunger with a variety of Delta Kits bridge assemblies. The three components of this windshield repair injector are the plunger (male part), the cylinder (female part) and the injection molded end seal.

Also includes a 22435 Cleaning Jar & Cap.

Replaces Part Number: 1-100SM


From the Archives

Tech Tip: Don’t Take your Injector Seals for Granted!

If you can remember to change your injector seal after every 10 windshield repairs, it will help you avoid increased repair times, wasted resin, and most of all, poor quality repairs. Read on and you will learn even more about injector seal replacement.

Q: Why should I change the injector seal after every 10 repairs?

A: After 10 repairs, the inside walls of the seal begin to wear. This can allow resin to blow past the piston and up into the injector while you are applying pressure to the damage. When this happens, even though the seal is not visibly leaking, your pressure and vacuum cycles will be less effective. This opens the door to poor quality windshield repairs.

Q: Should I flip the injector seal around? Use it the other way to get more life out of it?

A: No. It’s not typically the end of the seal that wears out. So, there would be no benefit to switching ends, even if they were the same. Look carefully at both ends of the seal.  Notice a stamp that reads “This Side In” on one end. That side is not a flat surface, due to the text on the end of the seal, meaning it will not seal properly if that side is placed against the glass. Both ends are not the same, but the differences are subtle enough that many technicians may not notice the difference without that writing.

You will also notice on the end of the seal with the writing that the hole is flared out slightly. This is to make the injector slide in easier. On the end of the seal that touches the glass, the hole is tapered in slightly to create a bit more pressure just as the resin enters the break, and to help prevent leaking. READ MORE ->->

Ratings and Reviews

Ratings and Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping

Shipping

Delta Kits Shipping:

Training

Training

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

Ask an Expert

Ask an Expert

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

Description

The Screw Type Injector Plunger I-100SM, 12030, is a robust and well-built windshield repair tool that is virtually “bulletproof” and has 4 impressive features:

  • Manufacturing excellence, high-sheen stainless-steel polish surfaces I-100S injector plunger. The stainless steel provides for smoother operation.
  • Superior tooling providing excellent fit and function.
  • Knurling has been retained in key grip areas, but is less pronounced for improved comfort.
  • Minimal threads on the outer piston make for fast operation and less resin waste.

Use the Screw Type Injector Plunger with a variety of Delta Kits bridge assemblies. The three components of this windshield repair injector are the plunger (male part), the cylinder (female part) and the injection molded end seal.

Also includes a 22435 Cleaning Jar & Cap.

Replaces Part Number: 1-100SM


From the Archives

Tech Tip: Don’t Take your Injector Seals for Granted!

If you can remember to change your injector seal after every 10 windshield repairs, it will help you avoid increased repair times, wasted resin, and most of all, poor quality repairs. Read on and you will learn even more about injector seal replacement.

Q: Why should I change the injector seal after every 10 repairs?

A: After 10 repairs, the inside walls of the seal begin to wear. This can allow resin to blow past the piston and up into the injector while you are applying pressure to the damage. When this happens, even though the seal is not visibly leaking, your pressure and vacuum cycles will be less effective. This opens the door to poor quality windshield repairs.

Q: Should I flip the injector seal around? Use it the other way to get more life out of it?

A: No. It’s not typically the end of the seal that wears out. So, there would be no benefit to switching ends, even if they were the same. Look carefully at both ends of the seal.  Notice a stamp that reads “This Side In” on one end. That side is not a flat surface, due to the text on the end of the seal, meaning it will not seal properly if that side is placed against the glass. Both ends are not the same, but the differences are subtle enough that many technicians may not notice the difference without that writing.

You will also notice on the end of the seal with the writing that the hole is flared out slightly. This is to make the injector slide in easier. On the end of the seal that touches the glass, the hole is tapered in slightly to create a bit more pressure just as the resin enters the break, and to help prevent leaking. READ MORE ->->

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delta Kits Shipping:

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

YOU MIGHT ALSO LIKE

Screw Type Injector Plunger I-100SM Stainless Steel

$100.00

Your Cart
0