Hardened Steel Replacement Point for the Slide or Spring Hammer

$7.20

(1 customer review)

In Stock

Hardened steel replacement tip for slide hammer and spring hammer (0.060 diameter).

- +
SKU: 22010 Category:

30 DAY MONEY BACK

35+ YEARS IN BUSINESS

30 DAY MONEY BACK

MADE IN THE USA

35+ YEARS IN BUSINESS

Details

Details

Description

Hardened steel replacement point tip for slide hammer and spring hammer (0.060 diameter). Keep an extra Hardened Steel Replacement Point in your tool box.


From the Archives

Using the Slide Hammer as a Glass Probe

As a probe, use the sharp end of the Slide Hammer to remove loose glass fragments. Also works well to remove dust and other contaminates from the pit area of a stone damaged windshield. This procedure only takes a few seconds and perform before beginning each and every windshield repair.

As a mini bull’s-eye maker insert the Slide Hammer into a small drill hole at the end of a long crack. For best results the drill the hole using the Delta Kits .047 Carbide Bur to a depth of approximately 1.5 mm (2/3rds through the outer layer of glass). With the tool held at a 90-degree angle to the glass, insert the point of the Slide Hammer into the hole and hold firmly against the glass at the bottom of the hole with one hand.  Use the other hand to raise the brass hammer approximately 7 cm.

With a slight throwing motion, the hammer slides back into the receiver until it comes in contact with the receiver’s bottom. As the hammer impacts the bottom of the receiver, the point drives deeper into the drill hole creating a small bull’s-eye.

Practice Makes Perfect

Always use in accordance with the manufacturer’s instructions the Delta Kits slide hammer is much safer than other tools used for this purpose and provides more consistent results.

With a hole of the proper size and depth, most technicians find that little or no practice is necessary. Make a perfect bull’s-eye every time. However, Delta Kits recommends practicing a few times on a scrap piece of laminated glass or an old windshield. Get comfortable with the tool.

  1. For a smaller bull’s-eye, use less force…. Continue Reading
Ratings and Reviews(1)

Ratings and Reviews(1)

1 review for Hardened Steel Replacement Point for the Slide or Spring Hammer

  1. Nathon S.

    Nice to have this part available to purchase without buying it all new.

Only logged in customers who have purchased this product may leave a review.

Shipping

Shipping

Delta Kits Shipping:

Training

Training

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

Ask an Expert

Ask an Expert

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

Description

Hardened steel replacement point tip for slide hammer and spring hammer (0.060 diameter). Keep an extra Hardened Steel Replacement Point in your tool box.


From the Archives

Using the Slide Hammer as a Glass Probe

As a probe, use the sharp end of the Slide Hammer to remove loose glass fragments. Also works well to remove dust and other contaminates from the pit area of a stone damaged windshield. This procedure only takes a few seconds and perform before beginning each and every windshield repair.

As a mini bull’s-eye maker insert the Slide Hammer into a small drill hole at the end of a long crack. For best results the drill the hole using the Delta Kits .047 Carbide Bur to a depth of approximately 1.5 mm (2/3rds through the outer layer of glass). With the tool held at a 90-degree angle to the glass, insert the point of the Slide Hammer into the hole and hold firmly against the glass at the bottom of the hole with one hand.  Use the other hand to raise the brass hammer approximately 7 cm.

With a slight throwing motion, the hammer slides back into the receiver until it comes in contact with the receiver’s bottom. As the hammer impacts the bottom of the receiver, the point drives deeper into the drill hole creating a small bull’s-eye.

Practice Makes Perfect

Always use in accordance with the manufacturer’s instructions the Delta Kits slide hammer is much safer than other tools used for this purpose and provides more consistent results.

With a hole of the proper size and depth, most technicians find that little or no practice is necessary. Make a perfect bull’s-eye every time. However, Delta Kits recommends practicing a few times on a scrap piece of laminated glass or an old windshield. Get comfortable with the tool.

  1. For a smaller bull’s-eye, use less force…. Continue Reading

1 review for Hardened Steel Replacement Point for the Slide or Spring Hammer

  1. Nathon S.

    Nice to have this part available to purchase without buying it all new.

Only logged in customers who have purchased this product may leave a review.

Delta Kits Shipping:

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

YOU MIGHT ALSO LIKE

Hardened Steel Replacement Point for the Slide or Spring Hammer

$7.20

Your Cart
0