Injector End Seals

$14.50$154.00

(8 customer reviews)

In Stock

Using superior materials and proprietary design, Delta Kits’ injector end seals outperform the competition hands down. Don’t be fooled by imitations, for fit, form, and function, nothing else compares.

Available in two packing options:

12210 Injector End Seals – White (Pkg of 5)

12215 Injector End Seals – White (Pkg of 100)

- +
SKU: 12210 Category:

30 DAY MONEY BACK

35+ YEARS IN BUSINESS

30 DAY MONEY BACK

MADE IN THE USA

35+ YEARS IN BUSINESS

Details

Details

Description

Using superior materials and proprietary design, Delta Kits’ injector end seals outperform the competition hands down. Don’t be fooled by imitations, for fit, form, and function, nothing else compares.

  • Matched Perfectly for all Delta Kits metal injectors
  • Precision injection molding process for quality and consistency
  • Chamfered OD for easy installation (injector end)
  • Flared ID matched to plunger shape for smooth insertion (injector end)
  • Tapered ID for increased pressure and leak resistance (glass end)
  • Off-white color to aid in air and contaminate identification with minimal reflection
  • Elastomeric compound retains its shape indefinitely and seals against glass exceptionally well
  • The thick-wall design increases seal life, provides increased pressure, and leak resistance.
  • The industry-leading chemical resistant compound will not shrink or swell
  • For optimal results change the end seal every ten repairs

Available in two packing options:

12210 Injector End Seals – White (Pkg of 5)

12215 Injector End Seals – White (Pkg of 100)


From the archives

Tech Tip: The Importance of Changing End Seals

Many technicians try to save a dime or two by using the same end seal for an overly extended period of time, but those technicians may not know that by overusing an end seal they are compromising the quality of the repair and likely wasting resin. By changing out the white end seal at the bottom of the Delta Kits injector, technicians can ensure that repairs are done correctly and efficiently.

For best results, Delta Kits recommends replacing the injector end seal after every 10 repairs or sooner if there is a noticeable change in pressure or resin leakage around the seal. Not to mention, after 10 uses the end seals begin to break down and get softer. The inside diameter of the end seal is smaller than the plunger to provide a leak-free seal. After repeated use the hole becomes enlarged, eventually resulting in loss of pressure. Loss of pressure can create leakage of resin, even though this may result in wasted resin, and makes it difficult to ensure that the damage is filled. Continue Reading

Ratings and Reviews(8)

Ratings and Reviews(8)

8 reviews for Injector End Seals

  1. Kevin C.

    Good quality end seals. Love Delta Kits! Been using their products since April 2010.

  2. Curtis N.

    These seals last forever (almost). We have been using Delta Kits for over 15 years and are very pleased with their products and service!

  3. Nathon S.

    My repairs always turn out awesome!

  4. Donald H.

    Delta Kits Injector end Tips
    The best because I tried all the rest.
    They do not blow out under extreme pressure.
    Last through many repairs.

    -Donald

  5. Jeff H.

    These are the real deal. Don’t waste your money on anything else, like I did. They are the hard plastic.

  6. Michael S.

    The beautiful repairs that are produced. I could go on, but I think 81 is enough.

  7. John K.

    I don’t like anything about this product to tall not wide enough or flexible enough for a good seal to glass

  8. Alexei B.

    Very useful thing. Enough to work for a long time. The best injector seals. Let’s take more!

Only logged in customers who have purchased this product may leave a review.

Shipping

Shipping

Delta Kits Shipping:

Training

Training

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

Ask an Expert

Ask an Expert

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

Description

Using superior materials and proprietary design, Delta Kits’ injector end seals outperform the competition hands down. Don’t be fooled by imitations, for fit, form, and function, nothing else compares.

  • Matched Perfectly for all Delta Kits metal injectors
  • Precision injection molding process for quality and consistency
  • Chamfered OD for easy installation (injector end)
  • Flared ID matched to plunger shape for smooth insertion (injector end)
  • Tapered ID for increased pressure and leak resistance (glass end)
  • Off-white color to aid in air and contaminate identification with minimal reflection
  • Elastomeric compound retains its shape indefinitely and seals against glass exceptionally well
  • The thick-wall design increases seal life, provides increased pressure, and leak resistance.
  • The industry-leading chemical resistant compound will not shrink or swell
  • For optimal results change the end seal every ten repairs

Available in two packing options:

12210 Injector End Seals – White (Pkg of 5)

12215 Injector End Seals – White (Pkg of 100)


From the archives

Tech Tip: The Importance of Changing End Seals

Many technicians try to save a dime or two by using the same end seal for an overly extended period of time, but those technicians may not know that by overusing an end seal they are compromising the quality of the repair and likely wasting resin. By changing out the white end seal at the bottom of the Delta Kits injector, technicians can ensure that repairs are done correctly and efficiently.

For best results, Delta Kits recommends replacing the injector end seal after every 10 repairs or sooner if there is a noticeable change in pressure or resin leakage around the seal. Not to mention, after 10 uses the end seals begin to break down and get softer. The inside diameter of the end seal is smaller than the plunger to provide a leak-free seal. After repeated use the hole becomes enlarged, eventually resulting in loss of pressure. Loss of pressure can create leakage of resin, even though this may result in wasted resin, and makes it difficult to ensure that the damage is filled. Continue Reading

8 reviews for Injector End Seals

  1. Kevin C.

    Good quality end seals. Love Delta Kits! Been using their products since April 2010.

  2. Curtis N.

    These seals last forever (almost). We have been using Delta Kits for over 15 years and are very pleased with their products and service!

  3. Nathon S.

    My repairs always turn out awesome!

  4. Donald H.

    Delta Kits Injector end Tips
    The best because I tried all the rest.
    They do not blow out under extreme pressure.
    Last through many repairs.

    -Donald

  5. Jeff H.

    These are the real deal. Don’t waste your money on anything else, like I did. They are the hard plastic.

  6. Michael S.

    The beautiful repairs that are produced. I could go on, but I think 81 is enough.

  7. John K.

    I don’t like anything about this product to tall not wide enough or flexible enough for a good seal to glass

  8. Alexei B.

    Very useful thing. Enough to work for a long time. The best injector seals. Let’s take more!

Only logged in customers who have purchased this product may leave a review.

Delta Kits Shipping:

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

YOU MIGHT ALSO LIKE

Injector End Seals

$14.50$154.00

Your Cart
0