Rock Chip Moisture Evaporator 12 Volt

$128.00

In Stock

Removes moisture from most repairable windshield damage within 20 seconds. May also be used to warm small areas prior to beginning the repair process.

Replaces Part Number: DS101

- +
SKU: 24430 Categories: , ,

30 DAY MONEY BACK

35+ YEARS IN BUSINESS

30 DAY MONEY BACK

MADE IN THE USA

35+ YEARS IN BUSINESS

Details

Details

Description

Removes moisture from most repairable windshield damage within 20 seconds. May also be used to warm small areas of glass before beginning the repair process.


From the Archives

Some Unexpected Results When Drying A Break

Editor’s Note: The Windshield Repair Forum is a hub for opinion, ideas, comments, venting, questions about windshield repair and headlight restoration, business, and sometimes just life in general. A recent question posted to the forum led to us doing some testing on the topic of drying out a break and the results were surprising.

The discussion centered on the pros and cons of various tools used to heat glass and remove the moisture including blow dryers, a moisture evaporator, and heat guns. The question that got it all going was, “…have you ever measured the heated area by a [moisture evaporator] right away after heating about 20 seconds? What temperature did you measure?”

The short answer is yes, I have measured the temperature of the heated glass. However, I can’t really give you an exact answer due to the number of variables involved.  Let me explain.

The Explanation

The temperature of the glass before applying the moisture evaporator will vary. We did a test starting with a glass temperature of approximately 76 degrees*. After the moisture evaporator was applied for 20 seconds we got an average. The glass temperature reading of 140 degrees.  We did the same test but this time preheated the glass to 125 degrees, before applying the moisture evaporator for 20 seconds.  This time we got an average glass temperature reading of 197 degrees.

Never did the glass temperature reach 212 degrees, but the water did begin to bubble in 10-12 seconds and was gone in 16-17 seconds.  The interesting thing to note here is that heating the glass to 140 degrees with a hair dryer did not remove the water from the break but heating the glass to 140 degrees with a moisture evaporator did!  I’m sure there is a good explanation for that but I have to admit I don’t know what it is.

There can be significant variances in the measured glass temperature depending…. Continue Reading

Ratings and Reviews

Ratings and Reviews

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shipping

Shipping

Delta Kits Shipping:

Training

Training

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

Ask an Expert

Ask an Expert

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

Description

Removes moisture from most repairable windshield damage within 20 seconds. May also be used to warm small areas of glass before beginning the repair process.


From the Archives

Some Unexpected Results When Drying A Break

Editor’s Note: The Windshield Repair Forum is a hub for opinion, ideas, comments, venting, questions about windshield repair and headlight restoration, business, and sometimes just life in general. A recent question posted to the forum led to us doing some testing on the topic of drying out a break and the results were surprising.

The discussion centered on the pros and cons of various tools used to heat glass and remove the moisture including blow dryers, a moisture evaporator, and heat guns. The question that got it all going was, “…have you ever measured the heated area by a [moisture evaporator] right away after heating about 20 seconds? What temperature did you measure?”

The short answer is yes, I have measured the temperature of the heated glass. However, I can’t really give you an exact answer due to the number of variables involved.  Let me explain.

The Explanation

The temperature of the glass before applying the moisture evaporator will vary. We did a test starting with a glass temperature of approximately 76 degrees*. After the moisture evaporator was applied for 20 seconds we got an average. The glass temperature reading of 140 degrees.  We did the same test but this time preheated the glass to 125 degrees, before applying the moisture evaporator for 20 seconds.  This time we got an average glass temperature reading of 197 degrees.

Never did the glass temperature reach 212 degrees, but the water did begin to bubble in 10-12 seconds and was gone in 16-17 seconds.  The interesting thing to note here is that heating the glass to 140 degrees with a hair dryer did not remove the water from the break but heating the glass to 140 degrees with a moisture evaporator did!  I’m sure there is a good explanation for that but I have to admit I don’t know what it is.

There can be significant variances in the measured glass temperature depending…. Continue Reading

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Delta Kits Shipping:

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

YOU MIGHT ALSO LIKE

Rock Chip Moisture Evaporator 12 Volt

$128.00

Your Cart
0