Round Tipped Carbide .039 Burs – Drill Bits – Burrs

$13.40$177.00

(3 customer reviews)

In Stock

Constructed of tungsten-carbide with stainless-steel shaft. Round tip reduces skipping and chipping. Small holes minimize visual scarring. Recommended for cleaning, opening tight damage, and drilling pit caps.

The 26030 Round .039 Carbide Bur is used in conjunction with the 14100 1/16″ Collet and 14001 Mini Rotary Tool for superior results.

- +
SKU: 26030 Categories: ,

30 DAY MONEY BACK

35+ YEARS IN BUSINESS

30 DAY MONEY BACK

MADE IN THE USA

35+ YEARS IN BUSINESS

Details

Details

Description

Constructed of tungsten-carbide with stainless-steel shaft. Round tip reduces skipping and chipping. Small holes minimize visual scarring. Recommended for cleaning, opening tight damage, and drilling pit caps. The 26030 Round .039 Carbide Bur is used in conjunction with the 14100 1/16″ Collet and 14001 Mini Rotary Tool for superior results.

Round Tipped Carbide .039 Burs

Replaces Part Number: FG2

Available in two packaging options:

26030 Round Tipped Carbide .039 Burs Pkg of 5

26035 Round Tipped Carbide .039 Burs Pkg of 100

burrs, drill bits

Windshield Repair Bur Durability Rating scale


Which Bur for Windshield Repair?

When do I drill? Which bur should I use? Are carbide burs really better than diamond burs? While the answer may not make a difference in whether you land a customer or not, the questions are worthy of consideration. By the end of this article, I hope to have cleared up any confusion in regard to bur selection.

“When do I need to drill a break?”

We at Delta Kits recommend drilling during the windshield repair process in three situations: (1) those where you are unable to get the resin to flow into the break, (2) to anchor a crack longer than a couple of inches in length, and (3) when a pit must be capped for the injector to seal properly.

In most cases, repair resin will be able to fill the break if you are properly using Delta Kits equipment, even when there is very little glass missing from the impact point. Many technicians drill the break to create a large channel so the resin will flow more easily. This does speed up the repair, but it also affects the repair cosmetically. Each time you drill a break there will be a visible drill hole. It is up to you to decide if the cosmetic difference is worth the extra couple of minutes. To me, it is definitely worth the wait if the result is a better cosmetic appearance. READ MORE

Ratings and Reviews(3)

Ratings and Reviews(3)

3 reviews for Round Tipped Carbide .039 Burs – Drill Bits – Burrs

  1. Bradley M.

    This is a great product. We have ordered these for years. Delta Kits has all the items we need to do windshield repairs here at our shop.

  2. Nathon S.

    These work well, seem to stay sharp for a long time too.

  3. Jacob S.

    allows you to drill chips without rotating your wrist. the circular tip does all the work.

Only logged in customers who have purchased this product may leave a review.

Shipping

Shipping

Delta Kits Shipping:

Training

Training

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

Ask an Expert

Ask an Expert

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

Description

Constructed of tungsten-carbide with stainless-steel shaft. Round tip reduces skipping and chipping. Small holes minimize visual scarring. Recommended for cleaning, opening tight damage, and drilling pit caps. The 26030 Round .039 Carbide Bur is used in conjunction with the 14100 1/16″ Collet and 14001 Mini Rotary Tool for superior results.

Round Tipped Carbide .039 Burs

Replaces Part Number: FG2

Available in two packaging options:

26030 Round Tipped Carbide .039 Burs Pkg of 5

26035 Round Tipped Carbide .039 Burs Pkg of 100

burrs, drill bits

Windshield Repair Bur Durability Rating scale


Which Bur for Windshield Repair?

When do I drill? Which bur should I use? Are carbide burs really better than diamond burs? While the answer may not make a difference in whether you land a customer or not, the questions are worthy of consideration. By the end of this article, I hope to have cleared up any confusion in regard to bur selection.

“When do I need to drill a break?”

We at Delta Kits recommend drilling during the windshield repair process in three situations: (1) those where you are unable to get the resin to flow into the break, (2) to anchor a crack longer than a couple of inches in length, and (3) when a pit must be capped for the injector to seal properly.

In most cases, repair resin will be able to fill the break if you are properly using Delta Kits equipment, even when there is very little glass missing from the impact point. Many technicians drill the break to create a large channel so the resin will flow more easily. This does speed up the repair, but it also affects the repair cosmetically. Each time you drill a break there will be a visible drill hole. It is up to you to decide if the cosmetic difference is worth the extra couple of minutes. To me, it is definitely worth the wait if the result is a better cosmetic appearance. READ MORE

3 reviews for Round Tipped Carbide .039 Burs – Drill Bits – Burrs

  1. Bradley M.

    This is a great product. We have ordered these for years. Delta Kits has all the items we need to do windshield repairs here at our shop.

  2. Nathon S.

    These work well, seem to stay sharp for a long time too.

  3. Jacob S.

    allows you to drill chips without rotating your wrist. the circular tip does all the work.

Only logged in customers who have purchased this product may leave a review.

Delta Kits Shipping:

Training and Tradeshows

This windshield repair training is a hands-on, intensive, one day course designed to take your repair quality to the next level. Whether you are just starting out or are a seasoned pro, this class is right for you!

Our team of experienced technicians are dedicated to offering the highest standard of training in the windshield repair industry. During the Delta Kits Training and Certification course, technicians are trained to follow ROLAGS (Repair of Laminated Auto Glass Standards), the industries best practices. Delta Kits Training and Certification covers all technical aspects of windshield repair and will take you from never having completed a repair, to being among the best technicians in the industry. The marketing and insurance billing discussion is designed to help you become more successful in your windshield repair business.

GET AN EXPERT ANSWER TO YOUR PRODUCT QUESTIONS:

Who are our experts

Brent:

Brent Deines was originally trained by a Novus Methodman in 1987 and is NWRA certified. He has extensive experience repairing windshields and restoring headlights in a variety of climates and conditions. Deines has owned several auto glass repair and replacement businesses in Montana and Oregon and is currently the President and CEO of Delta Kits where he helped develop the company’s headlight restoration program and started the company’s windshield repair training and certification program in 1995.

Korey:

Korey Gobin, Delta Kits sales manager, is NWRA certified and has been training individuals as well as large groups in the art of professional windshield repair and headlight restoration since 2008. Gobin is actively involved in the Repair of Laminated Automotive Glass Standard and in 2011 was awarded the Mobile Tech Windshield Repair Person of the Year. Korey serves on the ROLAGS committee and has traveled extensively throughout the USA, Canada, and Mexico to promote high-quality standards for windshield repair and headlight restoration. He is affectionately known by his customers as the “Go to Guy” for windshield repair.

Graham:

Graham Watson, is one of the original Novus Technicians in the UK since 1988 and since then has been running a very successful windscreen repair service in the UK. In 2008 Graham was named Windshield Repair Person of the year at the Mobile Tech Expo, an award he is very proud of as it is voted for by his peers in the trade. For the past 10 years, Watson has been active training technicians for the repair industry and specializes in advanced training for techs with previous experience, during this time he has been lucky enough to work with people from many different countries. His passion for helping others carry out the best quality repairs possible shows in the time he spends offering advice on different trade forums as Screenman.

YOU MIGHT ALSO LIKE

Round Tipped Carbide .039 Burs – Drill Bits – Burrs

$13.40$177.00

Your Cart
0