If you cannot find the answer you are looking for, Ask an Expert or post your question on our Windshield Repair Forum

< All Topics

What is the best way to remove moisture chipped windshield?


What is the best way to remove moisture from a star break or a bullseye?


The Delta Kits Moisture Evaporator (Product # 24430) is designed to bring the water in the glass to the boiling point. If you put a mirror on the inside of the glass and preheat the moisture evaporator until the element is red-hot, then place the tool directly over the impact point (touching the glass), you should see the water begin to bubble in 10-15 seconds depending on the size of the damage. A few seconds later, the bubbles stop and the break is dry. Total dry time is typically 17-20 seconds, again, depending on the size of damage. That is why the instructions recommend a 20-second heat cycle…it almost always “completely” removes the moisture.

Table of Contents
Your Cart